TA Instruments DMA 850 - Setting up ACS via DMA 850 Interface; Configuring Environmental Accessory

Air Chiller System (ACS) and Chiller Panel Getting Started Guide for the DMA 850 Page 35
Setting up the ACS Accessory From the DMA 850 User Interface
After successfully installing the ACS Accessory, set up the accessory from the DMA 850 user interface.
1 From the Home screen, press System . The System screen displays.
2 From the System screen, press Cooling Accessories . The Environmental Accessory selection
screen displays.
3 Press the OFF button for the appropriate ACS Accessory to turn the accessory on.
Figure 30 Turn on the accessory in the Environmental Accessory selection screen.