Air Chiller System (ACS) and Chiller Panel Getting Started Guide for the DMA 850 Page 47
Chapter 3:
Use and Maintenance
Using the Air Chiller System Accessory
All of your ACS Accessory experiments will follow the same general outline. In some cases, not all of
these steps will be performed. The majority of these steps are performed using the instrument control soft-
ware. See the instrument control online help for instructions on performing these actions.
• Selecting and preparing the sample
• Creating or choosing a test procedure and entering experiment information through the TA Instru-
ments instrument control software
• Loading the prepared sample
• Starting the experiment
Before You Begin
Before using the ACS Accessory, ensure that the instrument is installed properly. Also make sure you
have:
• Connected the ACS
• Powered on the instrument
• Specified the ACS in the instrument control software, if required (see Chapter 2
)
• Become familiar with controller operations
To Next Page
Loading...
Need help?
General