TA Instruments DMA 850 User Manual

Air Chiller System (ACS) and Chiller Panel Getting Started Guide for the DMA 850 Page 20
Choosing a Location
Choose a location for the accessory using the following guidelines. The ACS Accessory should be:
In
• A temperature-controlled area. Temperatures should be in the range specified in Table 4.
• A clean environment
• An area with ample working and ventilation space. 20 cm (8 in) clearance is required at the front and
back of the ACS unit to provide adequate ventilation.
On
• A level floor surface capable of safely supporting the weight of the system
Near
• Your DMA 850
Away from
• Dusty environments
• Exposure to direct sunlight
• Poorly ventilated areas

TA Instruments DMA 850 Specifications

General

Brand	TA Instruments
Model	DMA 850
Category	Chiller
Language	English