DHR Series Getting Started Guide Page 6
Safety
Do not attempt to service this instrument, as it contains no user-serviceable components.
Required Equipment
While operating this instrument, you must wear eye protection that either meets or exceeds ANSI Z87.1
standards. Additionally, wear protective clothing that has been approved for protection against the
materials under test and the test temperatures.
Instrument Symbols
The following label is displayed on the instrument for your protection:
Please heed the warning labels and take the necessary precautions when dealing with these areas. This
Getting Started Guide contains cautions and warnings that must be followed for your own safety.
Symbol Explanation
This symbol indicates that you should read this Getting Started Guide for impor-
tant safety information. This guide contains important warnings and cautions
related to the installation, operation, and safety of the instrument.
Ce symbole indique que vous devez lire entièrement ce guide de démarrage. Ce
guide contient d'importants avertissements et mises en garde relatifs à l'installa-
tion, à l'utilisation et à la sécurité de l'instrument.
This symbol indicates that a hot surface may be present. Take care not to touch
this area or allow any material that may melt or burn to come in contact with
this hot surface.
Ce symbole indique la présence possible d'une surface chaude. Prenez soin de
ne pas toucher cette zone ou de laisser un matériau susceptible de fondre ou de
brûler entrer en contact avec cette surface chaude.
This symbol indicates that you are advised to consult this manual for
instructions.
Ce symbole indique que nous vous recommandons de consulter ce manuel pour
les instructions.
To Next Page
Loading...
Need help?
General
