Need help?Do you have a question about the TA DHR-2 and is the answer not in the manual?
Provides critical warnings regarding instrument operation, maintenance, and material handling.
Outlines essential safety practices related to the instrument's electrical connections and power supply.
Details safety procedures and precautions for handling liquid nitrogen, including potential asphyxiation risks.
Covers general usage guidelines, maintenance, and repair procedures for the rheometer.
Details the design and functions of major rheometer components like the motor, bearings, and sensors.
Guides on system installation, relocation, and initial packaging removal.
Specifies environmental and site requirements for instrument installation, including space and utilities.
Details the cable connections required between the rheometer main unit and the electronics box.
Provides instructions for plugging in and powering on the electronics box and rheometer.
Explains how to ensure the instrument is level for optimum performance using adjustable feet.
Step-by-step guide on how to install a measurement geometry onto the rheometer spindle.
Outlines the steps for safely starting up and shutting down the rheometer system.
Covers general maintenance, repair precautions, and safe procedures for moving the instrument.
Describes common startup errors, system issues, FPGA, and power drive problems.
General| Model | TA DHR-2 |
|---|---|
| Software | TRIOS |
| Torque Range | 0.1 µN·m to 200 mN·m |
| Temperature Range | -150°C to 600°C |
| Normal Force Range | 0.005 to 50 N |
| Motor Type | Brushless Servo Motor |
| Operating Modes | Controlled Stress, Controlled Rate |
To Next Page
