TA CMI User Manual

TA-CMI
307 161-50
2004.xx
User Manual

TA CMI Specifications

General

Brand	TA
Model	CMI
Category	Measuring Instruments
Language	English

Summary

Guarantee

General Device Information

FCC and ETL Compliance

Device compliance with FCC rules and ETL safety standards.

Unpacking and Important Information

Radio Frequency, Storage, and Battery Charging

Key details on radio use, storage, and battery charging for optimal operation.

Keyboard and Display Interface

Device Controls and Symbols

Explanation of instrument buttons, navigation keys, and on-screen icons.

Valve Setting Procedure

Instrument Startup Procedures

First-Time and Normal Startup

Steps for initial instrument setup and standard daily startup.

Connecting to Measuring Points

Disconnection from Measuring Points

Measure Valve

Define Media for Flow Calculations

How to specify the actual media type, temperature, and weight for accurate flow calculations.

Freezing Measurement Readings

How to pause and hold displayed measurements for easier note-taking.

Measure Temperature

Save Temperature as Media Temperature

Option to store measured temperature for later flow calculations.

Handwheel Setting Calculation

Calculate Valve Factor (Kv) for Non-TA Valves

Procedure for determining the Kv value for valves not manufactured by TA.

Instrument Setup and Information

Configuring Instrument Settings

Setting language, backlight, sleep mode, key beep, radio, and units.

Accessing Instrument Information

Viewing program versions and battery status for instrument and sensor units.

Fault Clearing, Service, and Calibration

Troubleshooting Instrument Faults

Resolving common issues like no radio communication or blank LCD.

Service and Calibration Procedures

Guidelines for contacting service and scheduling regular instrument calibration.

Available Accessories