DATA SHEET
The following section provides a brief guideline on developing a data sheet and information that should be
included.
Tested By: Print the name of the test technician.
Signature: For authenticity, have the test technician sign here.
Date: Indicate the date the test was performed.
Product: Indicate or describe the product or type of material being tested.
Notes: Add any special test procedures or other general notes.
Sample No.: For traceability, it is recommended that all test specimens be issued a sample number and that the
sample number be recorded here.
Test No.: It is recommended that all tests on a particular specimen be issued a sequential test number and that
test number be recorded here.
Test Medium: Indicate the test medium used.
Speed: Indicate the speed used in cycles / minute.
Stroke Length: Indicate the stroke length used.
No. of Cycles: Indicate the number of cycles per each test.
Evaluation Criteria:
Hazemeter: The percentage of transmitted light and percent haze, before and after exposure to abrasion.
Appearance Changes: Description of the visual changes.
Weight: The specimen weight prior to starting and after completing the test.
Data Sheet#: Indicate the sequential data sheet number here, for your records.
51 5135 / 5155 Operating Instructions ver 1.1
To Next Page
Loading...
