WWW.TACTACAM.COM
REFORMATTING YOUR CARD
GETTING TO KNOW YOUR TACTACAM
Always use a recommended SD Card for your camera. You will need
a class 10, 32 or 64 GB micro SD Card from your local retailer
Note: You should always format your SD Cards before using in
your Tactacam for the rst time or after it has been installed in any
other device. Only use high quality class 10 or higher micro SD
Cards. Tactacam SD Cards, Lexar, or SanDisk Ultra Extreme are
recommended.
Please see more info on SD Cards at tactacam.com/support
Use one of the following methods to access the video tutorial and full
user manual located on your micro SD Card.
1. Using the provided USB cord connect your Tactacam to
your computer. Power on your camera to allow the computer and
camera to communicate. You will see an icon on your computer
desktop (usually named TACTACAM). Open it and download the
videos and user manual to your computer. Any videos taken with
your Tactacam will be in the “Video” folder.
2. Remove your micro SD Card from your Tactacam and insert
the micro SD Card into the provided micro SD Card adapter.
To Next Page
Loading...
Need help?
General
