TAD CE1 - Choosing Where To Place The Speakers

6
Choosing Where To Place The Speakers
Speaker placement within the listening room will have a great impact upon the total performance of TAD Compact Evolution One speaker
system in terms of bass performance, tonal accuracy, and imaging. All rooms are different and so this section is intended as a guide only.
Experimentation in your room will yield optimum results.
Begin by placing the rear of the speakers approximately one to two feet in from the front walls and the sides one to two feet in from the
side walls of your listening room, as shown in Figure 1. Your listening position should be roughly equal to the distance between the two
speakers. Also, turn the speakers inward so each axis points toward the listening position.
Next, connect the audio system as described in CONNECTING THE SPEAKERS on page 7. Then, optimize the speaker placement as
described in OPTIMIZING THE SYSTEM on page 11.
Listening Position
(e.g., on couch)
B
12 in. to 24 in.
(305 mm to 610 mm)
12 in. to 24 in.
(305 mm to 610 mm)
12 in. to 24 in.
(305 mm to 610 mm)
AA
• Distance “A” must be greater than distance “B”.
• Each TAD Compact Evolution One is turned toward listening position.
Right
TAD Compact Evolution One
Left
TAD Compact Evolution One
Figure 1. Placement of a pair of TAD Compact Evolution One speakers for stereo music listening
Speaker care
The TAD Compact Evolution One speaker system is crafted with a painted finish. Wipe the cabinet surface gently with the accessory
cleaning cloth to remove dust and fingerprints.
CAUTION

When dusting the cabinet, do not use cleansers, abrasives or chemically impregnated cloths.

Contact with alcohol, benzene, insecticides or other chemicals may cause peeling or discoloration of the finished surface.