10
ABOUT THIS SYSTEM
Intended Use
KIPTRACK 2 in1 Blood Glucose & Blood Pressure
Monitoring System is intended for the quantitative measurement of
glucose in fresh capillary whole blood for self testing by persons with
diabetes in the home or by healthcare professionals in healthcare
facilities. The system is also intended to be used to measure non-
invasively the systolic and diastolic blood pressure and pulse rate of
an adult individual, over age 16, at home.
Principle of Measurement
Blood glucose is based on the measurement of electrical current
generated by the reaction of glucose with the reagent of the strip.
The monitor measures the current and displays the correspond-
ing blood glucose level. The strength of the current produced
by the reaction depends on the amount of glucose in the blood
sample.
Blood pressure is measured non-invasively at the upper arm based on
the Oscillometric method.
Both functions work separately (one measurement either blood
glucose or blood pressure at a time) to avoid any interference
problems.
KIPTRACK
To Next Page
