Tait TB9300 - 5.4.6 Firmware upload

104 Working with Base Stations from Your PC TB9300 Installation and Operation Manual
© Tait International Limited April 2024
Reciter Series 2
Files and
Extensions
Reciter Series 1
Files and
Extensions
5.4.6 Firmware upload
The Upload button allows you to select a file to upload from your computer
or network location.
Direct Upload
Release Application Folder Files
a
Choose
Firmware from
folder
3.10 and
later
DMR/MPT BaseStation\feeds dmr-bin-n.nn.nn.nnnn.dmr.tbc02 BaseStation
a. File extensions differ between Series 1 & 2 files. When you [Upload] a file, the base station chooses
a file extension filter that reflects your hardware and the selected firmware type.
Direct Upload
Release Application Folder Files
a
,
b
Choose
Firmware from
folder
3.10 and
later
DMR/MPT BaseStation\feeds dmr-bin-n.nn.nn.nnnn.dmr.tbc BaseStation
3.05 to 3.09 DMR/MPT BaseStation\feeds dmr-bin-n.nn.nn.nnnn.tbc BaseStation
3.00, 2.60 DMR/MPT TB9300\feeds dmr-bin-n.nn.nn.nnnn.tbc TB9300
pre - 2.60 TB9300,
TB7300
TB9300\feeds dmr-bin-n.nn.nn.nnnn.tbc TB9300
a. File extensions differ between Series 1 & 2 files. When you [Upload] a file, the base station chooses
a file extension filter that reflects your hardware and the selected firmware type.
b. The file extension for Series 1 binaries changes in version 3.10. If upgrading from older releases,
choose ‘All Files (*.*)’ in the [Upload] file picker dialog.