Tait TM8115 User Manual

10 Getting Started
Radio
Indicators
The LED indicators and the radio’s audible tones all
combine to give you information about the state of your
radio. The way these indicators behave is affected by the
way your radio is programmed.
The following sections describe the most common opera-
tion of the radio indicators.
LED Indicators
Audible Indicators
Your radio may be programmed so that whenever you
press a key, the radio beeps to indicate whether or not
your action is permitted.
A short, medium-pitched beep indicates that an action
or selection is permitted. A long, low-pitched beep indi-
cates that the action or selection is not permitted.
LED Meaning
red
(transmit)
glowing: your radio is transmitting
flashing: your transmit timer is about to
expire
green
(receive and
monitor)
glowing: there is activity on the current
channel, even though you may not be able
to hear it
flashing: you have received a call with valid
special signalling, or you have activated
monitor or squelch override
amber
(scanning)
glowing: your radio is scanning a group of
channels for activity
flashing: your radio has detected activity on
a channel, and has halted on this channel
function
key LEDs
the operation of these leds depends on the
type of function programmed for each
function key.

Tait TM8115 Specifications

General

Brand	Tait
Model	TM8115
Category	Radio
Language	English