TB9400/TN9275 Installation and Operation Working with Base Stations from Your PC 109
© Tait International Limited May 2023
5.4.10 Switching Application Packages
To switch between one firmware application package to another, you must
first activate the firmware in the inactive slot. Upon activation, the base
station will reboot and come up with the firmware that has been activated.
5.4.11 Working with Configuration Files
Channels To see all channels associated with both P25/AS-IP and DMR/MPT, go to
Configure > Base Station > Channels.
If you attempt to go online with a channel that is invalid for the firmware
application you are currently using, an alarm will activate (Monitor >
Alarms). The alarm will warn you that the channel you are attempting to
use will not function.
To Next Page
Loading...