98 Working with Base Stations from Your PC TB9400/TN9275 Installation and Operation
© Tait International Limited May 2023
5.3.2 Monitoring Operation
Use the monitoring pages, to see how the base station is currently
operating. The example screen below illustrates the base station’s network
interface under P25/AS-IP conditions (Monitor > Interfaces > Trunked
RF).
If the base station is part of a simulcast network, you can monitor the
simulcast timing of the transmitter and the central voter (Monitor >
Synchronization). When connected to the central voter, the browser can
monitor its timing.
To Next Page
Loading...
General