30 Basic operation
Selecting a channel bank
Channel banking is an optional feature that allows easy
access to large numbers of channels by grouping them into
‘banks’. This feature will be of benefit if you regularly access
a large number of channels, or frequently change repeaters.
If your radio is programmed for channel banking, each
position on the channel selector denotes a channel bank.
To select channel banks 1 to 16:
■ Turn the channel selector to the channel bank you want.
Using the menu to select a channel bank
For channel banks other than 1 to 16:
1 Long press the menu key
to enter menu mode.
2 Scroll through the main menu options to find SELECT
BANK
using the arrow keys .
3 Short press the menu key to enter BANK
mode.
4 Scroll through the available channel banks using the
arrow keys, then short press the menu key
to confirm
a selection.
OR
Key in the desired channel bank number using the
keypad, then short press the menu key to confirm a selec-
tion. A low warning beep will sound if the keyed number
is not a valid channel bank (radios with an alphanumeric
keypad only).
5 Long press the menu key to exit menu mode. You will not
be able to exit the bank mode until a valid channel bank
has been selected.
To Next Page
Loading...
Need help?
General