Troubleshooting 61
Troubleshooting
If you are experiencing difficulty operating your radio, you
may find the following sections helpful. Consult your radio
provider for assistance, if necessary.
This section covers:
■ when your radio won’t turn on
■ removing a belt clip
■ checking the version of your radio
■ troubleshooting your charger
■ general care
■ cleaning the radio.
When your radio won’t turn on
If the red LED on the radio does not light up when the radio
is turned on, it is probable that power is not reaching the
radio. Check the following:
■ Is the battery firmly attached to the radio?
■ Is the battery sufficiently charged?
■ Is the battery charger working properly?
If all appears to be in order, but your radio still fails to
operate properly, contact your radio provider for further
assistance.
Removing a belt clip
The belt clip has been designed to prevent accidental
removal, but you can take it off, if required.
To remove a belt clip from a battery:
1 Insert a flat screwdriver blade or similar flat object under
the lip of the release lock (that is, between it and the
metal slider).
To Next Page
Loading...
Need help?
General