Changing your radio’s settings 49
2 Short press the menu key , then scroll through the
available menu options until NIGHT is displayed.
3 Short press the menu key to turn backlighting on and off.
4 Long press the menu key to exit menu mode.
Adjusting contrast
If the radio’s display is too light or too dark, you can adjust
the LCD contrast using the contrast adjustment function.
The contrast can be adjusted using a function key or the
menu. After making the adjustment, the radio will
automatically return to its previous mode of operation after a
few seconds of inactivity.
To adjust the display contrast:
■ Press the assigned function key. The message CONTRAST
ADJUSTMENT
is displayed. Use the arrow keys to
adjust the contrast to the desired level.
OR
1 Enter the display settings menu as described at the
beginning of this section.
2 Short press the menu key , then scroll through the
available menu options until
ADJUST CONTRAST is
displayed.
3 Use the arrow keys
to adjust the contrast to the
desired level.
4 Long press the menu key to exit menu mode.
Resetting contrast to the default setting
Your radio may be programmed so that you can reset the
contrast to the factory’s default setting using function key 2.
To reset the contrast to the radio’s default setting:
■ Press and hold function key 2 while turning the radio off
then on again.
To Next Page
Loading...
Need help?
General