17
TP8100 radios with the product code “T03-20x” have FM IS
approval.
The following communication accessories can be used with an
Intrinsically Safe TP8100 radio, but are suitable for IS / I / 1 / CD
and NI / I / 2 / CD applications only.
■ TPK-AA-101 heavy-duty speaker microphone (MIL-STD) with
volume control and programmable button
■ T952-051 in-ear earphone
Warning Use only an IS-approved battery with an IS radio, and
do not charge the battery in a hazardous location. An explosion
could cause serious injury or death.
Use only IS-approved accessories with IS radios. For an up-to-date
list of FM-approved accessories, go to the Tait website or contact
your nearest Tait office.
Warning IS certification applies only while the product is used in
accordance with these instructions.
Radio installation and operation in vehicles
Warning Keep the radio away from airbags and airbag deploy-
ment areas. Do not install, charge, or place a radio near such
areas. An activated airbag can propel a portable radio with suffi-
cient force to cause serious injury to vehicle occupants. An airbag
may not perform to specification if obstructed by a radio.
Warning To avoid damage to existing wiring, airbags, fuel tanks,
fuel and brake lines, or battery cables, refer to the installation
guide for the radio, and to the vehicle manufacturer’s manual,
before installing electronic equipment in the vehicle.
Using a handheld microphone or a radio while driving a vehicle
may violate the laws and legislation that apply in your country or
state. Please check the vehicle regulations in your area.
To Next Page
Loading...
Need help?
General
