42
Scanning a group of channels
The scan function is used to monitor a group of channels for
activity. When there is activity on a channel in the group, the radio
stops on that channel. The radio then unmutes and you can hear
the call. Scanning resumes when the channel is no longer busy.
While the radio is scanning for activity, the LED glows orange.
The two types of scanning that may be available on your radio are:
■ standard scanning, and
■ background scanning.
Selecting a standard scan group
A standard scan group is selected in the same way as a channel.
See "Selecting a group" on page 36.
Activating background scanning
Background scan is turned on using an assigned function key.
When the function key activates background scan, the currently
selected channel automatically becomes a member of the
background scan group.
To activate background scan:
■ Press the assigned function key.
To Next Page
Loading...
Need help?
General
