65
low power
transmit
Overrides the radio’s programmed transmit power
setting. See "Low power transmit" on page 34.
monitor Turns monitor on and off, so that the user can hear all
traffic on a channel. See "Checking that a channel is
clear" on page 36.
nuisance delete Temporarily deletes the current channel from the
currently selected scan group. See "Suspending a chan-
nel from a scan group" on page 43.
one touch call Sends a preset individual or group call, a DTMF preset
call or selects a channel. See "Making one-touch preset
calls" on page 47.
preset call Sends a preset call programmed for the current channel.
See "Making an individual or group call" on page 45
and "Calling a telephone or a remote device" on
page 47.
repeater
access tone
Sends a repeater access tone to activate the repeater
before a call is made. See "Activating the repeater
before a call" on page 37.
repeater
talkaround
Allows you to bypass normal repeater operation and
communicate directly with another radio. See "Commu-
nicating directly with other radios" on page 37.
squelch
override
Turns squelch override on and off, so the user can hear
all activity on a channel, including noise. See "Hearing
faint and noisy signals" on page 41.
scrambler Turns the scrambler on and off, so the user can scramble
transmissions and decipher scrambled incoming calls.
See "Using voice inversion scrambling" on page 39.
two-tone
override
Turns two-tone signaling on and off, so the user can hear
traffic that would normally be muted. See "Overriding
two-tone signaling" on page 46.
Function Description
To Next Page
Loading...
Need help?
General
