Tait TP9400 Manual

TN-2817c-AN www.taitradio.com Page 11 of 14
Power-Cycle Radio with Automatic Reconnection
TP9300/9400/9500/9600
1. Pair Bluetooth® device(s) to Radio A and/or Radio B depending on configuration and test.
2. Ensure both radios are on the same channel.
3. Wear the paired and connected Bluetooth® device.
4. Press and Hold Radio A F2 Programmable PTT and verify Radio B unmutes and audio is
heard on the expected speaker. Release the F2 Programmable PTT and verify Radio B mutes.
5. Press and Hold Radio B F2 Programmable PTT and verify Radio A device unmutes and audio
is heard. Release the F2 Programmable PTT and verify Radio A device mutes.
6. Radio B performs a ‘hard’ power-cycle by disconnecting and reconnecting the battery.
7. Respond to the Bluetooth® device prompt to connect on Radio B.
8. Press and Hold Radio A F2 Programmable PTT and verify Radio B device unmutes and audio
is heard. Release the F2 Programmable PTT and verify Radio B device mutes.
9. Press and Hold Radio B F2 Programmable PTT and verify Radio A device unmutes and audio
is heard. Release the F2 Programmable PTT and verify Radio A device mutes.
TP3350
1. Pair Bluetooth® device(s) to Radio A and/or Radio B depending on the test.
2. Ensure both radios are on the same channel.
3. Wear the paired and connected Bluetooth® device.
4. Press and Hold Radio A PTT and verify Radio B device unmutes and audio is heard. Release
PTT and verify Radio B device mutes.
5. Press and Hold Radio B PTT and verify Radio A device unmutes and audio is heard. Release
PTT and verify Radio A device mutes.
6. Radio A performs a ‘hard’ power-cycle by disconnecting and reconnecting the battery. The
device should automatically reconnect to Radio A.
7. Press and Hold Radio A PTT and verify Radio B device unmutes and audio is heard. Release
PTT and verify Radio B device mutes.
8. If the device doesn’t reconnect automatically, on Radio A, search devices (Menu > Accessories
Bluetooth > My devices > Search devices).
9. Follow the radio UI prompts until the device is connected.
10. Press and Hold Radio A PTT and verify Radio B device unmutes and audio is heard. Release
PTT and verify Radio B device mutes.
11. Press and Hold Radio B PTT and verify Radio A device unmutes and audio is heard. Release
PTT and verify Radio A device mutes.

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000