Tait TP9400 Manual

TN-2817c-AN www.taitradio.com Page 12 of 14
Power-Cycle Bluetooth® Device
TP9300/9400/9500/9600
1. Pair Bluetooth® device to Radio B.
2. Ensure both radios are on the same channel.
3. Wear the paired and connected Bluetooth® device.
4. Radio B device to be power-cycled (as per manufacturer’s instructions).
5. Wait until the device has automatically connected.
6. Press and Hold Radio B F2 Programmable PTT and verify Radio A unmutes and audio is
heard on the expected speaker. Release the F2 Programmable PTT and verify Radio A
mutes.
7. Press and Hold Radio A F2 Programmable PTT and verify Radio B device unmutes and audio
is heard. Release the F2 Programmable PTT and verify Radio B device mutes.
TP3350
1. Pair Bluetooth® device(s) to Radio A and Radio B.
2. Ensure both radios are on the same channel.
3. Wear the paired and connected Bluetooth device.
4. Radio A device to be power-cycled (as per manufacturer’s instructions).
5. Press and Hold Radio A PTT and verify Radio B device unmutes and audio is heard. Release
the PTT and verify Radio B device mutes.
6. Press and Hold Radio B PTT and verify Radio A device unmutes and audio is heard. Release
PTT and verify Radio A device mutes.

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000