Functional Limit Level
Functional Limit Level
Various types of machine operations are controlled by each functional limit level. This functional limit level will not
display some operation and it has the purpose to protect design data from taking out unnecessarily or prevent
incorrect parameter setting.
How to see the chart 2
: It is possible to use.
: The function name will not be displayed.
: The key operation is not available.
: Input of the password is necessary.
Chart 2
Functional Limit
Level
Application Detail
It is the value at shipment. For some functions, the password is
needed.
Refer to "Chart
2”.
OPM The only function relating to production will be displayed.
NWM
This level will show minimum required function only in the
embroidery machine controlled by Network.
Menu key Function
Functional Limit Level
(Initial value)
OPM
(Operation
mode)
NWM
(Network
mode)
1 Data Input (Memory) ........................................47
4 Data Input (USB)..............................................36
Not to display
5 Data Input (LAN)..............................................40
8 Memory Delete...............................................184
10 Data Input (name) ..........................................45
2 Functional limit level
Functional Limit Level(p.143)
When the functional limit level is set, "OP" or "NW" is displayed
at the upper left of the main screen.
To Next Page
Loading...
