EasyManua.ls Logo

Takagi T-H3M-DV - 3 inch vent installation; 4 inch vent installation

Takagi T-H3M-DV
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Page
Installaon
Installaon Manual
3inchventinstallaon
1. Connecta3"elbowdirectlyonthe
intake vent collar of the water heater.
2. Connecta3"coupling directly on the
exhaust vent collar of the water heater.
Make sure the couplings engage
the o-rings installed in the intake
and exhaust vent collars
3. Connecta3"straightpipeto
the coupling.
3"coupling
Exhaust
vent collar
(Female)
3" straight pipe
3" coupling
Intake vent
collar
(Female)
3" straight pipe
1. Connect3"couplingsdirectlyon
the exhaust and intake vent collar
of the water heater.
Make sure the couplings engage
the o-rings installed in the intake
and exhaust vent collars
2. Connect3"straightpipestothe
couplings.
For details of the optional items, refer to the Installation manual for each optional item.
Ventconnectionsfortwo-pipe
Ventconnectionsforsinglepipe
3" coupling
3" straight pipe
Exhaust
vent collar
(Female)
*3"elbowwith
birdscreen
Intake vent
collar
(Female)
*The water heater came with a metal screen
that will fit into a 3 inch elbow.
For details of the optional items, refer to the Installation manual for each optional item.
1. Connect3"x4"increasers
directly on the exhaust and intake
vent collar of the water heater.
Make sure the couplings engage
the o-rings installed in the intake
and exhaust vent collars
2. Connect4"straightpipesto
the increasers.
4" straight
pipe
3"x4" increaser
Exhaust
vent
collar
(Female)
Intake vent
collar
(Female)
4" straight
pipe
3"x4"
increaser
4" straight pipe
3"x4" increaser
Exhaust vent
collar (Female)
*3"elbowwith
birdscreen
Intake vent
collar
(Female)
1. Connecta3"elbowdirectlyonthe
intake vent collar of the water heater.
2. Connecta3"x4"increaser directly on
the exhaust vent collar of the water
heater.
Make sure the couplings engage
the o-rings installed in the intake
and exhaust vent collars
3. Connecta4"straightpipeto
the increaser.
Ventconnectionsfortwo-pipe
Ventconnectionsforsinglepipe
*The water heater came with a metal screen
that will fit into a 3 inch elbow.
4inchventinstallaon

Related product manuals