22
T-K2 with Storage Tank
This illustration is a concept design only.
The maximum flow rate through the T-K2 is 6.9 GPM. If
it is necessary to achieve higher flow rates with full pressure for longer periods of time, then it
can be installed in conjunction with a storage tank. A pump will be necessary to keep the
storage tank water hot. We suggest a high-head pump of 1/12 hp or greater depending on
the system.
Recirculation
This illustration is a concept design only. This system will also need a high-head pump of
1/12 hp or greater, depending on the application situation.
Pressure relief valve
Ex
ansion tan
Pump
Check valve
Cold In
Hot water to house
Hot water return
To Next Page
Loading...
Need help?
General
