- 22 -
T-M1 with Storage Tank
This illustration is a concept design only.
The maximum flow rate through the T-M1 is 9.6 GPM.
If it is necessary to achieve higher flow rates with full pressure for longer periods of time, then
it can be installed in conjunction with a storage tank. A pump will be necessary to keep the
storage tank water hot. We suggest a high-head pump of 1/12 hp or greater depending on
the system.
Recirculation
This illustration is a concept design only. This system will also need a high-head pump of
1/12 hp or greater, depending on the application situation.
To Next Page
Loading...
