2-36
CONTROLS
INSTRUMENT CLUSTER
• Battery (BATTERY)
Displays the battery voltage.
Press the (C) key to return to the DATA screen.
• Auxiliary circuit (AUXILIARY)
Displays the flow rate in the auxiliary
circuits of the 1st, 2nd or 3rd.
Each time the (B) key is pressed, the
auxiliary circuit is displayed in this order:
Auxiliary 1st, Auxiliary 2nd and Auxiliary
4th.
Press the (C) key to return to the Data
screen.
DATA SCREEN (DATA)
Press the (A) key to proceed to the screen
selected by the bar.
Press the (B) key to move the selection bar.
Press the (C) key to return to the Menu
screen.
• Trip meter (TRIP METER) for
maintenance
The trip meters for the engine oil filter,
hydraulic oil filter or fuel filter are displayed.
Press and hold the (A) key for at least five
seconds resets the selected trip meter to
“0”.
Press the (B) key to move the selection bar.
Press the (C) key to return to the DATA
screen.
To Next Page
Loading...
