2-37
CONTROLS
ACCESSORIES
Outlet select dial
Use this dial to select the desired outlet
depending on the purpose of use.
......Air comes from the front and rear
outlets.
......Air comes from the front, rear and
foot outlets.
.......Air comes from the foot outlet.
Arrange the air direction at each outlet.
Ventilation/Circulation select switch
Use this switch to select between Ventilation
and Circulation.
Press this switch once to turn on the lamp
and set to Circulation. Press this switch
again to turn off the lamp and set to
Ventilation.
Lamp
ison ....Circulation
•Coolorheatthecabquickly
•Whenexternalairisdirty
Lamp
isoff ....Ventilation
•Letsinfreshair
•Removesfrostingfromthewindows
•Ventilateswhilecoolingorheating
Outlets
Move the louvers up and down or left and
right
toadjusttheairowdirectionand
amount.
Operation
DehumidifyingandHeating(incoldclimates
or when the humidity is high)
Arrange the foot outlets and the defroster so
that they are directed to the front window.
Let
thedehumidiedwarmairblowonthe
front window, to prevent frosting.
1. Set the desired temperature by turning the
temperature control dial to between the
center and the right end.
2. Set the fan dial to the desired position.