Takeuchi TB285 - Page 92

2-44
CONTROLS
Presetting stations
1. Select the band (FM or AM) and the
station you want to preset.
2. To set the selected station to a preset
button, choose the button to be set and
then press and hold the button for three
seconds or more. The number of the
preset button chosen appears on the
LCD.
3. For more stations, repeat the steps (1) and
(2) above.
•Ifthepresetbuttononwhichastation
has been set to is pressed and held for
two seconds or more, the preset
information will be modified.
•Ifthestoredinformationiserasedduring
battery replacement on the vehicle, set
the stations again to the preset buttons.
•Eachpresetbuttoncanstoreinformation
on one FM station and one AM station.
AUTO storing
Press the AST button for two seconds or
more while playing the radio. The radio starts
seeking the audible stations obtained into
memory, and assign each preset button (1 to
6) a station.
Note: The previous station setting stored in
memory will be overwritten. If the
arrangement of the preset buttons to the
corresponding stations is not desirable, try
the “Presetting stations” described above.
ACCESSORIES
AUX audio connection
•Connectaportableaudioplayerandlisten
to your favorite music.
•Plugapatchcord(withoutresistor)intothe
headphonejackoftheaudioplayer.
•Plugastereominiplug(3.5mm)intothe
AUX-INjackontheradio.
•Tolistentotheaudioplayer,presstheAUX
button. (The AUX display appears and the
frequency display is changed to the clock
display.)
•Toreturntotheradio,presstheAUX
button again.
•Whenconnecting,adjustthesoundvolume
level of the audio player so that it is same
as that of the radio.
•Adjustthesoundvolumeoftheaudio
player by using the volume control buttons
on the radio.
•Donotconnectadevicewithalarger
output compared with a portable audio
player.
Setting the clock time
•Besurethatthetimeisdisplayedonthe
LCD.Ifnot,presstheAUXbuttonto
display the time.
•Usethetune
button to set the minute.
Use the tune
button to set the hour.
•Tosettheminutedigitsto“00”whenthey
are from “55” to “59” or from “01” to “05”,
press the ZERO button.