2-45
CONTROLS
Resetting the radio
If there are any problems, such as the
abnormal display of frequency or failure of
selection, reset the radio by pressing the
power button and the ZERO button together.
Note: That the memory containing the clock
setting and the channel setting is cleared
after reset.
SPECIFICATIONS
Power source: ............... 12/24 VDC
(negative ground)
Power consumption: ..... 2 A
Maximum output power: 16 W + 16 W (4Ω)
(at DC 28.8 V input)
5W+5W (4Ω) (at DC
14.4 V input)
Rated output power: ..... 14 W + 14 W (10%
distortion, 4Ω) (at
DC 28.8V input)
3.8 W + 3.8 W
(10% distortion, 4Ω)
(at DC 14.4V input)
Dimensions: ................... 178(W)x50(H)x
92 (D) mm (without
projections)
Receiving frequency: ..... MW (AM) 530 to
1602kHz(EU,
Asia),1710kHz
(North, Central and
South America)
FM 87.9 to 108
MHz
Practical sensitivity: ........ MW (AM) 32 dB or
less (S/N 20 dB)
FM 12 dB or less
(S/N 30 dB)
S/N ratio: ....................... MW (AM) 40 dB or
more
FM 60 dB or more
AUX IN: ......................... Stereominijack
(3.5 mm); rated
input, 90 mV
Note: Specifications and dimensions may be
changed without notice.
ACCESSORIES
To Next Page
Loading...
