Talento 472 - Program Management Operations; Delete - All Switching Commands; Reset

GB
21
You change – manually – the current switching state.
However, the individually set switching program is preserved.
1 for channel 1
2 for channel 2
12. Hand switch
= automatic
= OFF
=ON
The switching state
corresponds to the
entered program.
= Manual mode
=ON
= OFF
You change
–manually–
the current switching
state.
The next switching
command in the
program is executed
automatically again.
FIX = continuous operation
FIX = Continuous ON
FIX = Continuous OFF
You change
–manually–
the current switching
state.
Only with the key
do you switch from
continuous operation
back to Automatic
mode.
13. DCF 77 radio operation (only 3 and 6 modular spacings)
The time switch receives the time signal DCF77 with an
additional antenna.
! Refer to the separate instruction !
If the time switch is synchronized, the symbol is
permanently on.