Talento 472 User Manual

1. Contents
2
1. Contents Page
2. Assembly, putting into operation, connection 3
3. Control elements 4
4. Display 4
5. Factory setting 5
6. Changing settings 6
6.1 Time and day of the week 6
6.2 Calendar month and day 7
6.2.1 AU = Automatic changeover 7
6.2.2 cHA = Weekday-related time change 8 - 9
6.2.3 no = no changeover 10
7. Standard switching commands 11
8. Weekday block formation 12 - 13
9. Impulse switching commands 14 - 15
10. Cycle switching commands 16 - 18
11. Read – change – delete – reset 19 - 20
12. Hand switch 21
13. DCF77 radio operation 21
14. Technical data 22

Talento 472 Specifications

General

Model	Talento 472
Operating Voltage	230V AC
Mounting Type	DIN Rail
Maximum Current	16A
Display	LCD
Battery Backup	Yes
Type	Timer
Programming	Digital

Summary

Assembly, Putting into Operation, and Connection

3.2 Putting into Operation

Explains initial activation, display, and energy-saving mode.

3.3 Connection

Details electrical connections and provides safety instructions.

Control Elements and Display

4. Display

Explains the LCD display elements and their meanings.

Factory Setting and Operating Modes

Operating Modes

Details three operating modes: AU, cHA, and no for time changeover.

Changing Settings

6.1 Time and Day of the Week

Instructions for setting the current time and day of the week.

Calendar Month and Day - Select Operating Mode

6.2.1 AU = Automatic Changeover

Steps to set automatic summer/winter time changeover based on legislation.

Standard Switching Commands

Set the Switching Times

Set the Switching State

Block Formation of Weekdays

Activating/Deactivating Days of the Week

Impulse Switching Commands

Setting the Start Time

Impulse Switching Command Configuration

Selecting the Switching Output

Cycle Switching Commands

Set the Start Time

Cycle Switching Command Setup

Select the Switching Output

Cycle Switching Command Duration Setting

Set the ON Switching Duration

Read, Change, Delete, and Reset Operations

Change

Delete - Individual Switching Commands

Program Management Operations

Delete - All Switching Commands

Reset

How to reset the device to factory settings, including date and time.