TalkTalk Super Router User Manual

14
5 Plug in
The power supply
IMPORTANT:
 F_gZ\aTaf[\aZceXh\bg_
attached to your old router, like
your YouView box

Make sure you have plugged
your router into the master
socket and leave it turned on,
we’ll be gradually adjusting your
speed until it is as fast as possible
over the next ten days.
4 Plug in the power supply at the wall
and connect the other end
to the back of the Super Router.
Turn on the power.
5 Press the on/off switch found
at the side of the Super Router.
2
Now go straight to page 22
to connect your devices
to broadband wirelessly.
Your Super Router set-up
is complete.
6 Your line is activated when the
Power, Broadband and Internet
lights go solid green. This can
take a few minutes.

TalkTalk Super Router Specifications

General

Antenna Type	Internal
Firewall	Yes
Parental Controls	Yes
Guest Network	Yes
Type	Wireless Router
Ethernet Ports	4
WAN Port	1
USB Ports	1
Security	WPA/WPA2
Frequency Bands	2.4GHz