YouView box
Power cable
You’re now ready to set up YouView. Go straight to page 18 for help.
4. Connect the power cable and switch on
Connect one end of the black power supply cable into your
YouView box
Connect the other end into a power socket near your YouView box
There are two On/Off switches on your YouView box. Press the On/
Off switch at the back of the YouView box, then press the I/O button
at the front. Then switch on your TV
When the middle light on your YouView box comes on, you are ready
to set up YouView
When everything is set up WITHOUT Powerline Adapters, it
should look like the picture above
10
Connect the box and cables
WITHOUT Powerline Adapters
TT4286 TT SELF INSTALL GUIDE AMENDS AUG TVSIGUIDE0813V5 V11.indd 10 03/10/2013 15:31
To Next Page
Loading...
Need help?
General