All you need to do now is set up YouView
Press the TV Source input button on your existing TV remote
(this is not your TalkTalk remote)
Select the number of the port you connected your HDMI or
SCART cable to, e.g. HDMI1. You can find out this number by
looking next to where the cable is connected to your TV.
Follow the instructions screen by screen using the arrow keys
and OK button on your remote.
First you’ll see this
Welcome screen…
Once you’ve been
through the screens and
are successfully set up,
you will automatically
be taken to BBC 1.
Set up YouView
18
TT4286 TT SELF INSTALL GUIDE AMENDS AUG TVSIGUIDE0813V5 V11.indd 18 03/10/2013 15:31
To Next Page
Loading...
Need help?
General