Talyn Plus 2 - Self-Calibration Weight Application; Applying Calibration Weight (ADD 100); Calibration Completion and Confirmation

21
Press to span the machine.
The window will display “
ADD”-“100”,then Use
your hand to rotate the tire until all the right side
lamp light up. At this moment clip the weight of
100g at the 12 clock
position outside of the tire. Press
to
span the machine. Until the span is over, you
finish the self-calibration
of the machine.
After complete the customer self-calibration, it will
display “
SAV”-“DAT” Then the customer
self-calibration is finished.