Tanaka TCS 51EAP Handling Instructions

English
7
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Chain saw, Portable
TCS51EAP
Decompression valve
It is important that you read, fully understand
before use, and observe the following safety
precautions and warnings. Careless or improper
use of the unit may cause serious or fatal injury.
Engine size
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Spark plug
Always wear eye, head and ear protectors when
using this unit.
Fuel tank capacity
Warning, kickback danger. Be careful of
possible sudden and accidental upward and/or
backward motion of the guide bar.
Chain oil tank capacity
One-handed usage not permitted. While
cutting, hold chain saw fi rmly with both hands
with thumb fi rmly locked around front handle.
kg
Dry weight
(Without guide bar and chain)
Chain brake Guide bar length
Choke
÷ 2
Chain pitch
On/Start Chain gauge
Off /Stop
L
p
A
ISO22868
Sound pressure level LpA*
1
by ISO 22868
Emergency stop
L
A
w
ISO22868
Sound power level LwA*
2
Measured by ISO 22868
Fuel and oil mixture
L
A
w
2000/14/EC
Sound power level LwA*
2
Measured /Guaranteed by 2000/14/EC
Chain oil fi ll
a
hv
Vibration level by ISO 22867
Front handle*
1
/ Rear handle*
1
Carburetor adjustment - Idle speed
K
Uncertainty
Carburetor adjustment - Low speed mixture
P
Max. engine power by ISO 7293
Carburetor adjustment - High speed mixture
MAX
Max. engine speed
Oil pump adjustment
MIN
Idle engine speed
Priming pump Type of chain
7
Guaranteed sound power level Max. chain speed
(Original instructions)
000BookTCS51EAP.indb7000BookTCS51EAP.indb7 2015/04/2010:31:172015/04/2010:31:17

Tanaka TCS 51EAP Specifications

General

Brand	Tanaka
Model	TCS 51EAP
Category	Chainsaw
Language	English