Tangent V20i v2 - BIOS Setup Utility; About BIOS Setup; When to Use BIOS Setup; How to Run BIOS Setup

24
English
CAUTION! We strongly recommend that you change the BIOS set-
tings only with the help of a trained service personnel.
The default BIOS (Basic Input/Output System) is already properly
con󰘰gured and optimized, there is normally no need to run this
utility.
To run the BIOS Setup Utility, turn on the computer and press the
[Del] or [F2] key during the POST procedure.
If the message disappears before you respond and you still wish
to enter Setup, either restart the system by turning it OFF and
ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
The setup function only can be invoked by pressing [Del] or [F2]
key during POST that provide an approach to change some
setting and con󰘰guration the user prefer, and the changed values
will save in the NVRAM and will take e󰘯ect after the system
rebooted.
Press [F7] key for Boot Menu.
You may need to run the BIOS Setup when:
・
An error message appears on the screen during the system
booting up and is requested to run SETUP.
・ You want to change the default settings for customized
features.
・You want to reload the default BIOS settings.
4.1.2 How to Run BIOS Setup ?
4.1.1 When to Use BIOS Setup ?
4.1 About BIOS Setup
BIOS SETUP