Need help?Do you have a question about the TanGO TX1 and is the answer not in the manual?
General| Operating Temperature | -10°C to +55°C |
|---|---|
| Wireless Frequency | 868MHz |
| IP Rating | IP54 |
| Detection Range | 12 meters |
| Power Supply | 3V Lithium battery (CR123A) |
Lists certifications for Tango TX1, including area classifications and temperature ranges.
Introduces the Tango TX1 as a portable single-gas monitor for personal protection.
Details instrument and sensor specifications, including dimensions, materials, and performance.
Emphasizes the importance of regular procedures for safety and instrument functionality.
Details configuration, self-test, bump test, zeroing, calibration, and docking procedures.
Specifies temperature and humidity conditions for storing the instrument.
Provides guidelines on how to wear the instrument for optimal safety and sensor performance.
Instructs on proper methods for cleaning the instrument's outer casing.
Lists items included in the package and guides the unpacking process.
Identifies and describes the main hardware components of the Tango TX1 instrument.
Explains the various display screens, status indicators, and abbreviations used.
Details the procedures for starting up and shutting down the instrument.
Guides qualified personnel on setting up and adjusting instrument parameters.
Describes how to use the instrument in its normal operating mode.
Explains the essential maintenance procedures for ensuring accuracy and performance.
Provides an introduction to alarms, warnings, and notifications for instrument status.
Explains the different alarm levels (high/low), their persistence, and signal variations.
Details warning events, their urgency, and failure indicators like sensor errors.
Outlines procedures for performing service tasks, emphasizing safety and ESD prevention.
Details specific tasks like instrument disassembly, barrier replacement, and motor replacement.
Explains the terms and conditions of the product warranty, including coverage and exclusions.
Defines the extent of Industrial Scientific's liability and buyer's remedies.
Provides information on sensor cross-sensitivity and how other gases affect readings.
Explains sensor cross-sensitivity to toxic gases and their effect on target gas readings.
Lists the ATEX and IECEx markings for the Tango TX1, including certifications and temperature ratings.
Details performance data for CO and H2S sensors, including standards and special conditions.
To Next Page