TanGO TX1 - General Information; Certifications; Product Overview; Product Specifications

1
General Information
Certifications
Product Overview
Product Specifications
Certifications
Certifications for the Tango
®
TX1, at the time of this document's publication, are listed below in Table 1.1.
To determine the hazardous-area classifications for which an instrument is certified, refer to its label or the
instrument order.
Table 1.1 Certifications
Directive or CB
Area Classifications
Approved Temperature Range
Americas
CSA
Ex ia IIC T4; Class 1; Groups A, B, C, D; T4
-40 °C to +50 °C (-40 °F to +122 °F)
IECEx
Ex ia I Ma
Ex ia IIC T4 Ga
-40 °C to +50 °C (-40 °F to +122 °F)
INMETRO
Ex ia IIC T4 Ga
Ex ia I Ma
-40 °C to +50 °C (-40 °F to +122 °F)
UL
Class I, Zone 0, AEx ia IIC T4
Class II, Groups E, F, G
-40 °C to +50 °C (-40 °F to +122 °F)
Europe and Russia
ATEX
a
Ex ia I Ma
Ex ia IIC T4 Ga
Equipment Groups and Categories: I M1 and II 1G
-40 °C to +50 °C (-40 °F to +122 °F)
GOST EAC
PO Ex ia I X
0 Ex ia IIC T4 X
-40 °C to +50 °C (-40 °F to +122 °F)
GOST-R, -UA
Metrology Pattern Approval
-20 °C to +50 °C (-4 °F to +122 °F)
UKEx
b
Ex ia I Ma
Ex ia IIC T4 Ga
Equipment Group and Category: I M1 and II 1G
-40 °C to +50 °C (-40 °F to +122 °F)
Asia and Pacific
China Ex
Ex ia IIC T4 Ga
-20 °C to +50 °C (-4 °F to +122 °F)