3
Instrument Basics
Unpacking the Instrument
Hardware Overview
Display Overview
Start-up and Shutdown
Unpacking the Instrument
The items that are shipped with the unit are listed below (see Table 3.1); each item should be accounted for
in the unpacking process.
Table 3.1 Package contents
®
Calibration and bump test tubing
60.96 cm (2 ') of urethane tubing; 4.762 mm (3/16 ”) ID
Companion to the Tango TX1 Product Manual
1 Final Inspection & Test Report and
Declaration of Conformity
The Final Inspection & Test Report includes these values:
Unit setup date
Unit part number
Unit serial number
For each sensor:
• Part number
• Serial number
• Type
• Alarm settings
a
• Span information
a
a
At the time of shipment.
Note: If any item is missing or appears to have been damaged, contact Industrial Scientific (see "Contact Information") or a local distributor of
Industrial Scientific products.
To Next Page
Loading...