12
a. Resolution
Press Up/Down Button in video mode to select resolution. Press OK
button to enter the setting page and press Up/Down button to select
resolution, and then press OK button to confirm. Press Menu or Mode
button to exit the setting.
This setting is to set video resolution, the higher the resolution, the better
the video quality.
b．Loop Recording Time Setting
Press Up/Down Button in video mode to set loop recording. Press OK
button to enter the setting page and press Up/Down button to set
appropriate length of loop recording. Then press OK button to confirm.
Press Menu or Mode button to exit the setting.
This function is to set the length of loop recording as off / 2 min / 3 min
/5 min.
Loop recording will not activate when this function is turned off. It is
suggested to always activate loop recording function. Otherwise,
recording will not be processed when the TF card is full.
c． WDR
Press Up/Down Button in video mode to set WDR. Press OK button to
enter the setting page and Up/Down button to enable/disable WDR.
Then press OK button to confirm. Press Menu or Mode button to exit the
setting.
d． Motion Detection
Press Up/Down Button in video mode to set motion detection. Press OK
button to enter the setting page and Up/Down button to
enable/disable motion detection. Then press OK button to confirm.
Press Menu or Mode button to exit the setting.
When motion detection is on, the DVR will automatically activate and
record any movement that is detected in front of the camera. It will also
lock the recording and protect it from being overwritten. This feature
MUST be turned off during normal driving / recording.
e． Auto Power On/Off
Press Up/Down Button in video mode to set auto power on/off. Press OK
button to enter the setting page and Up/Down button to
enable/disable this function. Then press OK button to confirm. Press
Menu or Mode button to exit the setting.
Once activated, the DVR will automatically turn on and start recording
with the ignition of the car. Once this feature is turned off, it needs to be
To Next Page
Loading...
Need help?
General