19
On Date/Time setting page, there are three rows as in date, time and
date format. Set date first by pressing Up/Down button. Press OK after
done and move the cursor to the next spot on the right. Adjust date and
hour/minute/second from top to bottom. On the third row, press
Up/Down button to set date format and then press OK. Press Menu or
Mode button to return to System Setting Page, press again to exit the
page.
This setting is to set correct date and time on the DVR for video
recording and camera shooting.
2. Plate Number on Video
Press Up/Down button in System Setting to select Plate Number setting.
Press OK to edit plate number.
Start from the left, press Up/Down button to select the character on the
cursor, it can be letter, number or blank space on each character. Press
OK after each input and the cursor will move to the right. If you set the
number plate but still haven’t reached the last digit, press OK button
until the cursor reaches the last digit. And then press OK again to
To Next Page
Loading...
Need help?
General