As a standard the pump is supplied with the following items:
1. Complete pressure booster:
a. Quick air connection for air supply
b. Muffler
c. Pressure regulator
d. Two manometers – input and output pressure
2. Reinforcement plates (plastic pumps only)
3. Mounting plate with screws
4. Air connection between the pump and the booster
NOTE!
Even if all above safety instructions are met and complied with, there still exists a minor danger
in the event of a leakage or mechanical damage of the pump. In such case the pumped product
can emerge on sealing areas and connections.
To Next Page
Loading...
