TapFlo TF50 - Air Treatment System; Pump Prepared for Booster Assembly; Pump with Reinforcement Plates

4. OPTIONS
IOM manual Tapflo TF series 29
4.4. Air treatment system
If one decides to order booster without additional equipment, we can offer air treatment
systems as alternative:
Art. no
Pumps
Description
6-050-001F
TF50, TF70
Filter-regulator + manometer +
mounting bracket
6-200-001F
TF100, TF200,
TF120, TF220
Filter-regulator + manometer +
mounting bracket
6-400-001F
TF400, TF420
Filter-regulator + manometer +
mounting bracket
6-050-0F
TF50, TF70
Needle valve
6-200-0F
TF100, TF200,
TF120, TF220
Needle valve
6-400-0F
TF400, TF420
Needle valve
6-050-002F
TF50, TF70
Filter-regulator + manometer +
water separator + mounting bracket
6-200-002F
TF100, TF200,
TF120, TF220
Filter-regulator + manometer +
water separator + mounting bracket
6-400-002F
TF400, TF420
Filter-regulator + manometer +
water separator + mounting bracket
4.5. Pump prepared for booster assembly
Tapflo pumps can be fitted only with reinforcement plates
prepared for booster assembly but without the booster
itself. The pump will also have assembled the hybrid air
valve with PET piston. This way the pump is prepared for
high pressure applications and the end user can install the
booster on the pump by himself.
For this option, please use “11F” in pump code, e.g.
T100 PTT-11F.
4.6. Pump with reinforcement plates
Tapflo pumps can be supplied only with plain, stainless
steel reinforcement plates to make the construction more
robust. This way the pump is prepared for high pressure
applications and the end user can supply the pump with
compressed air from his installation.
For this option, please use “11S” in pump code, e.g. T100
PTT-11S.