Need help?Do you have a question about the Taramps MD8000.1 and is the answer not in the manual?
Details the warranty period and conditions for the product.
Covers sensitivity (GAIN), frequency filtering (CROSSOVER), and bass enhancement (BASS BOOST).
Details speaker output connections and impedance considerations.
Details positive/negative power supply connections and recommended cable gauge.
Specifies recommended wire gauges and protection fuse/circuit breaker ratings.
Lists output power ratings for 1, 2, and 4 Ohm loads.
General| Number of Channels | 1 |
|---|---|
| Power @ 1 Ohm 12.6V | 8000W |
| Signal to Noise Ratio | >90dB |
| Minimum Supply Voltage | 9V |
| Maximum Supply Voltage | 16V |
| Frequency Response | 10Hz |
| Crossover High Pass (HPF) | 10Hz |
| Dimensions (WxHxD) | 228 x 70 |
| Fuse Rating | 400A |
To Next Page
