Targa DPV-5300x - Setting the Clock Manually; To Set the Colour System

Preparation
13
Before Operation-VCR part
Setting the clock Manually
The clock in your DVD+VCR controls time and date set-
tings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when your DVD+VCR
detects a channel that broadcasts a Teletext signal.
If the broadcast signal is weak the clock will not be set
and will require setting manually.
1. Press i.
Press
b
or
B
to select SET.
Press ENTER/OK.
The ACSS mode can be set to “OFF” by pressing
ENTER/OK if you want to set the time manually.
2. Use the
v
or
V
on the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
3. If you make a mistake press
b
or
B
and enter the
correct details.
4. Press i to return to a TV picture.
To set the colour system
1. Press i.
2. The main menu will appear on the TV screen.
3. Press 1 or 2 to select the SYS and press
ENTER/OK.
4. Press 3 or 4 to select the menu option SYS, then
press ENTER/OK.
5. Press 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
6. Press i to remove the menus from the TV screen.
HH MM DD MM YY
:..- -
- -
- - - -
- - - - -
ACSS : ON
i
OK
12
SET
HH MM DD MM YY
:..00 1 01 06 SUN 8
ACSS : OFF
i
OK
12
SET
SYS
12
SET
OSD
ON
OFF
OSD
f
i
SYS
SYS
12
SET
OSD
ON
OFF
OSD
f
i
SYS
V1503P1Z.NA6ITTA_S_38U 12/09/2007 12:07 PÆgina 13