Targa Visionary LT 2210 Getting Started
English - 13
Adjusting the Volume
You can adjust the volume of your LT 2210 either via the remote control or via
the control panel.
Press the VOL+ button (5) on the remote control or the VOL+ (20) button on the
control panel of the LT 2210 to increase the volume.
Press the VOL- button (5) on the remote control or the VOL- (19) button on the
control panel of the LT 2210 to decrease the volume.
You can also mute the sound completely by pressing the MUTE button (16) on
the remote control. While the mute function is enabled, the message “MUTE” will
be displayed. Press the button again or press or the button V+ (5) to resume the
sound output.
Switching Preset Programmes
You can switch the preset programmes of your LT 2210 either via the remote
control or via the control panel.
Press the CH+ button (19) on the remote control or the CH+ (17) button on the
control panel of the LT 2210 to switch the programmes upwards.
Press the CH- button (19) on the remote control or the CH- (16) button on the
control panel of the LT 2210 to switch the programmes downwards.
You can also enter the number of the programme directly with the remote control.
For multi-digit numbers, press the number buttons in sequence.
To Next Page
Loading...