Installing the Batteries
3 Slide the battery cover back into position until it “clicks”
firmly into place.
Connect Button
Battery Cover
Batteries
1 Remove the battery cover located on the bottom of the
presenter.
2 Insert the supplied batteries, making sure that the
positive (+) and negative (-) ends ofeach battery match the
polarity indicators inside the battery housing.
WARNINGS: WHEN REPLACING THE BATTERIES, YOU MAY USE ALKALINE
OR OTHER HEAVY-DUTY NIMH BATTERIES. NEVER COMBINE ANALKALINE
WITH A NIMH BATTERY IN A DEVICE.
AVOID MIXING NEW AND USED BATTERIES IN A DEVICE.
Targus Wireless Multimedia Presenter with Trackball
To Next Page
Loading...
