Tascam MP-BT1 - 14 Specifications; Rated Audio Input and Output; Audio Performance; Other Specifications

TASCAM MP-BT1 31
Rated audio input and output
Bass Input Standard phone jack (mono, unbalanced)
Input impedance
1 MΩ
Maximum input level
+10 dBV
Headroom 10 dB
Phones/Line Out 1/8” (3.5 mm) stereo jack
Maximum output
20 mW + 20 mW (with 32 Ω headphones connected)
Audio performance
Frequency characteristics 20 – 20,000 Hz +1/–3 dB (Bass Input > Phones/Line Out)
Total Harmonic Distortion <0.05% (Bass Input > Phones/Line Out)
S/N ratio (Line Out) >90 dB (0 dBV)
Other specifications
MP3 file support Bit rate 32–320 kbps
Sampling frequency 44.1 kHz
VBR files Supported
ID3 tag display Up to Ver 2.4
Note that loop playback IN and OUT points may
not always set correctly for VBR MP3 files.
Memory medium Built-in flash memory (1 GB)
File system FAT16 (recognizes a maximum combined total of 550 files and folders)
Built-in lithium ion battery 3.7V DC
Power consumption About 1.5 W (during MP3 playback)
Dimensions (W x H x D) 78 x 110 x 25.5 mm (3.1 x 4.3 x 1 inches) excluding protrusions
Weight (including lithium ion battery)
220 g (7.8 ounces)
Accessory (sold separately) AC adapter (PS-P520)
Minimum computer requirements
Windows PC Windows 2000, XP
300 MHz Pentium
128 MB memory
USB port with 500 mA bus power (USB 2.0 recommended)
Macintosh Mac OS 10.2 or later
266 MHz Power PC (including iMacs, G3 and G4 processors)
64 MB memory
USB port with 500 mA bus power (USB 2.0 recommended)
Recommended USB host controller, Intel chipset
14 – Specifications